OceanStor 6.1.5 Advanced O&M Command Reference | 您所在的位置:网站首页 › rcache show pageinfo › OceanStor 6.1.5 Advanced O&M Command Reference |
Purpose This document describes how to use the command line interface (CLI) to set and manage storage systems, as well as the detailed usage methods of each command by function. The commands provided in this document are used for debugging and maintenance of storage systems, and ask for a higher execution permission than the commands run in the user view. It is recommended that they should be executed by experienced engineers with caution or under the guidance of Huawei engineers.An improper execution of any command may interrupt ongoing services and cause storage system failures. Users' decisions to use those commands by their own are entirely at their own risk. This document is applicable to the following product models.Product Model Product Version OceanStor 5310 6.1.5 OceanStor 5510 OceanStor 5610 OceanStor 6810 OceanStor 18510 OceanStor 18810 Intended AudienceThis document is intended for:Technical support engineersMaintenance engineers Content ComventionsThe purchased products, services, and features are stipulated by the commercial contract made between Huawei and the customer. All or partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees, or representations of any kind, either express or implied As part of an effort to improve and enhance the performance and capabilities of its product line, Huawei Technologies Co., Ltd. from time to time releases revisions of its hardware and software. Therefore, some functions described in this manual may not be supported by all revisions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes. If a product does not function as described in this manual, please contact your Huawei Technologies Co., Ltd. technical support. Symbol ConventionsThe symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. Change HistoryChanges between document issues are cumulative. The latest document issue contains all the changes made in earlier issues. Issue 02 (2022-11-15)This issue is the second official release. Issue 01 (2022-08-25)This issue is the first official release. |
CopyRight 2018-2019 实验室设备网 版权所有 |